Mechanical equipments are the ultimate resource of
product creation across the globe. With the lesser dimension, low energy input
and higher efficiency evaporators low temperature is the perfect choice for
vaporizing water at low temperature. Vacuum factor brings the temperature
difference of 60 degrees between the applied and normal process ( 100 degree C
). Alaquainc manufactures best in its segment Evaporators low
temperature that are supplied in various industries including
pharmaceutical and fine chemicals. Our business clients makes the utilisation
of the machinery most of the hours in a day without any interruption and
increases the amount of bring back of substances. They deliver us satisfied
attitude due to the convenience and quality of service they receive from our end.
Parts of Evaporators low temperature:
●
Evaporator heat exchanger.
●
Evaporator tank.
●
Process water circulation pump.
●
Condenser heat exchanger.
●
Refrigerant compressor.
●
Distillation tank.
●
Vacuum producing unit.
●
Distillate circulating pump.
How evaporators low temperature works inside the
structure?
Feed water enters inside the evaporator tank and
circulated with the help of a pump to an evaporator heat exchanger. At this
place, high pressure refrigerant makes the water hot which was directly
supplied from the refrigerant compressor. After this step, hot water converts
into water vapor at the top of the evaporation tank. Next to this, water vapor
is passed through mist eliminator and the condenser heat exchanger in
continuous flow. Then, the refrigerant from the evaporator heat exchanger flows
via a device labeled as air cooler. Hence, the refrigerant lowers down the
temperature of the heated water vapor in order to distillate and the same is
stored in the distillate tank of the evaporator. Onwards, the distillate is
revolved around by the distillate pump, producing vacuum in the evaporator
tank. This vacuum production in the evaporator tank causes the process water
during the whole operation to boil between the range of 40 to 50 degree C.
Lastly, the process water and distillate are automatically moved out with the
help of electrical controls.
What are the advantages of operating evaporators low
temperature of Alaquainc.com?
●
Minimal air pollution
●
Suitable for heat sensitive materials
●
Non-formation of scales
●
No compulsion of solution heating
condition
●
Energy saving as least required in
process execution
In what applications you can deploy Evaporators low
temperature?
●
Recovery of copper, nickel and
chrome from the rinse baths can be performed with this apparatus in surface
treatment and electro-plating industry.
●
While recovering lubricants,
glycols and heat treatment salts in the factory of mechanical, die-casting and
heat-treatment.
●
In PCB and microelectronics
enterprise, copper is regained and concentration of etching acid solution and
wastewaters is occurred.
●
During conducting few tasks named
as surface treatment, painting, degreasing, pickling, cooling fluids and so on
in the department of auto components.
●
Evaporators low temperature is also
invoked in the revival of precious metals such as gold, silver, platinum from
process waste waters.
●
Biodiesel plants also take in use
Evaporators low temperature system for solvent retrieval from process liquor.
●
Even heat sensitive active agents
and solvents are also rediscovered in the pharmaceutical and fine chemical
companies.
●
For extracting bio active
substances and essential oils in herbal and medicinal agency.
●
Evaporators low temperature device
recovers 95% water for reuse in the power generation organization.
No comments:
Post a Comment