The Alaquainc provide multieffect Closed Evaporator Crystallizer

Method of operation

The crystallizer is large to encrustation as the liquid interface the subject to periodic variation. Forced circulation crystallizers of super saturation cooling new design crystallization of two choices. Crystals due to the higher concentration exceeding these crystals are reintroduced to the solution so that they grow efficiency.

The process of crystallizing solutions based on evaporation cooled crystallizers are used where the solution boiling point elevation is extremely high, as in the case of caustic super saturation cooling system, or when the temperature level is so low that evaporation by vacuum is impractical. The circulation rate through the heat exchanger is normally high enough so the temperature of the slow evaporation system. One of the biggest opportunities we see is in the best space of benefits. It could be adiabatic Evaporation solution mining projects.

Cooling crystallization very high energy of the efficiency it can be used as a energy savings is established. In all evaporative crystallizer the liquid layer just beneath the evaporation zone is the region with the highest super saturation pre-cooled by a cooling unit and if they conducted into s saturated solutions cool, the mixture becomes supersaturated and crystallization starts with heat input for evaporation eliminated, a tremendous energy savings is established. This Crystallizers evaporative approach powdered by ingredients can be introduced directly via a powder dispensing unit installed on the inline crystallizer. The Alaquainc method of Additional powder ingredients, such as dry fondant or powdered sugar can, for example, can be introduced as seeding material to enhance the re-crystallization process.

Crystallization equipment is classified according to the method by which super saturation brought about :-

·        Super saturation by cooling

·        Super saturation by Evaporation

·        Super saturation by Crystallizers evaporative (Cooling and Evaporation)

The Super saturation by cooling crystallizer through an injection point. A large discharge at the end of the inline crystallizer Crystallizers evaporative powdered ingredients can be introduced directly via a powder dispensing unit installed on the inline crystallizer allows an consistent output, which can be adjusted with a throttle . Depending upon the Super saturation by adiabatic Evaporation is fed from the discharge of the inline crystallize

They  suited to areas where land is available and the climatic conditions for the operating site are favorable—low ambient temperatures, little precipitation, and/or a high potential for natural 

Expert in Manufacturing, Exporting and Supplying Quality Proven Range of Industrial Evaporators

Scraper Thin Film Evaporators is a new high-efficiency evaporator, falling film evaporator under vacuum. It can be widely applied in chemical, petrochemical, light industry, pharmaceuticals, pesticides, food, and environmental protection.

FEATURES ARE:

This device is the newest evaporator to form a thin film in the small flow tube evaporator section of the inner wall surface attached to the sludge in the treatment solution can be quickly removed by the scraper; it has the following performance and characteristics:

·         The heat transfer coefficient, the evaporation capacity, evaporation intensity 200 kg / m2 • hour, high thermal efficiency.

·         Material heating time is short, and in vacuum conditions more favorable for heat-sensitive materials, maintaining a variety of ingredients does not produce any degradation to retain the quality of the product.

·         To adapt to a wide range of changes in viscosity and low viscosity materials, material viscosity up to 100,000 centipoises (CP) can be addressed.

·         The wall of the evaporator cylinder through the precision drilling and surface polishing difficult to produce coke and flakes.

·         Easy to operate, the product index can be easily adjusted in limited circumstances and can be arranged for continuous production.

·         The footprint of the equipment is small, simple structure, easy maintenance, easy to clean.

OUR SERVICE

1. We can produce all kinds of chemical equipment according to your needs. Before you give us the contract and confidentiality agreement with you. Or we can make a design for you based on your requirements. What we deliver is not only the product, but also the solution and the design.

2. This Submerged combustion evaporators is guaranteed for up to one year after purchase unless caused by man-made damage. If there is something wrong with the quality problem of the product itself, we will change or repair it at our expense. If this is not the case, we offer customer service at your expense.

3. We will provide a video and document for installation. If you still have problems, we will send our engineer oversea for installation instructions. Even that if you encounter some problems .

Alaquainc Create Quality For Life

Centrifugal film evaporator is a kind of high efficient EVAPORATIVE SYSTEM , mechanical recompression that use the high speed rotary agitator that make the liquid evenly distributed as membrane on evaporation, Evaporators forced circulation process for deodorization, venting and heating, cooling unit operation, it is widely used in the industry of pharmacy, food, light industry, petroleum, chemical, environmental protection.

CHOOSE US AND GET MORE BENEFITS

1. Introduce innovative products to the market at a faster rate

2. Improve the reliability of the quality of the product

3. Reduce the total cost of the product effectively

4. The ability of research staff to creatively improve design

5. Get more leading technologies on product development and increase the competitive advantage of products

6. We offer long term after sales service

7. Meanwhile, you can call or e-mail us@ 201 758 1577to consult relevant questions, as we have a special line of after-sales service. Or you can also communicate online and solve your problems.

Create Quality for Life

At alaquainc Company we work from the conviction that the only quality that matters is quality that lasts a lifetime. With everything we think and create, our goal is to have a lasting impact. From Milk Evaporator cooling tanks on solar energy to life-saving medical technology, we make a worldwide impact.

Characteristics of the Evaporators - thermal recompression:-

• Suitable for high internal and external pressure due to a sophisticated spot pattern
• Resistant to high temperatures
• High K value due to optimum contact between the cooling / heating medium and the Temp-Plate
• Suitable for steam, water, thermal oil, ammonia and various coolants
• Smooth surface prevents adhesion and / or pollution
• Available in irregular shapes and / or with cutouts

So if you have any query related to Evaporators then simply communicate with us via email-info@alaquainc.com or phone- 2017581577. 

We will find solutions to any difficulties that are appropriate.